BUDS2 License Mechatronic Expert

Brand: BRP
Product Code: BUDS2 Mechatronic

Available Options


$0.00

  • Availability: In Stock 1000


BUDS2 Licenses Comparison Table

BUDS2 license capabilities

Procedures

Below is a list of procedures that are present in BUDS for different types of vehicles. Some of them are present in BUDS only for a certain type of vehicles, and when using additional adapters.

License type

Dealer Technician

Mechatronic Expert

Vehicle/Summary

  Change customer name

+

+

  Reset Maintenance Hours

+

+

  Reset trip hours

+

+

  Reset Trip distance A/B

+

+

  Change numbers VIN, Engine, Model

-

+

Keys

  Add/erase DESS keys (Normal/Learning/Rental)

(except Roadster Spyder)

+

+

  Enable/Disable DESS (except Roadster Spyder)

-

+

  Installing Secure Code

-

+

  Change the DESS Key type in two clicks

-

+

Settings

  Throttle position sensor

+

+

  Gear position sensor

+

+

  Tire Size

+

+

  ECM initialization

+

+

  Change cluster language

+

+

  Change cluster units

+

+

  Change cluster mode (normal/racing)

+

+

  Change Cluster Pointer Speed Position

+

+

  Change Cluster Pointer RPM Position

+

+

  Change Total Vehicle Hours (SeaDoo ECU Bosch)

-

+

  Setting Dynamic Power Steering (DPS)

+

+

  Torque Adjustment

+

+

  Enable/disable vehicle’s options/modules/sensors (ACS, DPS, VTS, Depth Sounder, Lake Water Temp,  Air Suspension, Belt protection, Fan, Electromechanical reverse, Supercharger, iS, iBr, Cruise+Slow Speed, Ski Mode, Altitude, VTS Switch, other options, modules and sensors) 

-

+

  VCM Bleeding Front/Rear Circuit

+

+

  VCM Reset Steering Angle Sensor

+

+

  VCM Reset Yaw Rate Sensor

+

+

  Edit Injector Coefficient (E-Tec Skidoo)

-

+

  Edit curves for 2-Stroke PWC

-

+

Monitoring

  Engine RPM/Speed

+

+

  Intake PSI

+

+

  TPS

+

+

  TAS

+

+

  Gear position

+

+

  Battery voltage

+

+

  Engine temperature

+

+

  GPS Position

+

+

  iBR Gate position

+

+

  iBR Target position

+

+

  iBR BRLS Lever

+

+

  Cylinder monitoring

+

+

  Exhaust temperature

+

+

  Oxygen Sensor Status

+

+

  Low Oil Pressure

+

+

  IACV Position

+

+

  Fuel and Ignition

+

+

  Atmospheric Pressure PSI

+

+

  Intake Air

+

+

  Engine Mode

+

+

  Dynamic Power Steering

+

+

  Cluster Lamp Activity

+

+

  Cluster WOW

+

+

  VCM Front / Rear Wheel Speed Sensor

+

+

  VCM Lateral Acceleration

+

+

  VCM Yaw Rate Sensor

+

+

  VCM Steering Angle Sensor

+

+

  ACS Position Sensor

+

+

  ACS Switch Input

+

+

  THCM Tuned Pipe

+

+

  THCM Muffler

+

+

Activations

  ECM Fuel Pressure Relief

+

+

  ECM Fuel Pump

+

+

  ECM Cooling Fan

+

+

  ECM Battery Relay

+

+

  ECM Oil System Bleeding

+

+

  ECM Storage

+

+

  Cluster WOW Test

+

+

  Cluster Buzzer Test

+

+

  Cluster Heater Handle

+

+

  Cluster Heater Thumb

+

+

  SCM Steering Assembly Validation

+

+

  SCM Compressor

+

+

  SCM Front / Rear Valve

+

+

  SCM Shock Absorber Pressure (High Pressure)

+

+

  SCM Auxiliary Line Pressure (Low Pressure)

+

+

  iBR Position Test

+

+

  IS Position Test

+

+

  TCM Activation

+

+

  TCM Gear Position

+

+

  TCM Routine

+

+

  ACC Suspension Up / Down

+

+

  ACC Reverse Actuator

+

+

  ACC Reverse Back Light

+

+

Faults

  Read and Erase Active and Occurred Faults

+

+

  View Possible Causes and  Service Actions

+

+

  Faults Conditions

(Speed, TPS, Intake PSI, Engine temp, Battery, Engaged Gear)

+

+

History

  Min/Max values

(RPM, Intake PSI, Intake Temp, Engine temp, Battery voltage)

+

+

  Runtime in % (Normal / Limp Mode)

+

+

  Runtime in Minutes (Normal / Limp Mode)

-

+

  RPM Profile in %

+

+

  RPM Profile in Minutes

-

+

  Speed Profile in %

+

+

  Speed Profile in Minutes

-

+

  Last Minute History

(RPM & Throttle Opening, Engine Temp, Intake Pressure, History Table)

+

+

  Clear Parts Replacement History

-

+

Modules

  ECM (Information & Update)

+

+

  Cluster (Information & Update)

+

+

  DPS (Information & Update)

+

+

  IBR (Information & Update)

+

+

  IBRMon (Information & Update)

+

+

  IS (Information & Update)

+

+

  VCM (Information & Update)

+

+

  TCM (Information & Update)

+

+

  IS (Information & Update)

+

+

  THCM (Information & Update)

+

+

  Clear History on Modules

-

+

  Cleaning Modules ECM and Cluster  “As new”

(total hours to “0”) on SeaDoo 4-tec 2005+ (ECU Siemens)

-

+

  Increase the power of SeaDoo Spark 60hp to 90 hp

-

+

 

Very important rules!

By purchasing the BUDS2 license you agree to the following terms:

1. Your email address registered with PayPal will be used to register your license for BUDS2.

2. One email can only be used to register one license for only one MPI.

3. One license can only be registered on 3 computers, so carefully read the minimum computer requirements (TAB Computer requirements) before registering a license to avoid useless registrations. 

BUDS2 can be run on less weak computers, but each case is unique. If you are not sure, then it is better to request a test license and check if your computer is suitable for working with BUDS2.

Cases such as "death" of the computer, reinstalling Windows, formatting the hard disk and other force majeure situations do not affect the limitation on the number of BUDS2 license registrations.

If you need to have more than tree computers with BUDS2, then you will need to buy a new license for more three computers.

For licenses with a duration of 5 and 10 years, there may be exceptions to the rules, but each case will be considered separately, and only if at least 3 years have passed since the first registration.

4. If you have several MPI interfaces and already have one license registered for your PayPal email, then you need to specify the alternative real email in the "Alternative email" field.

Before installing BUDS2, please make sure that your computer meets the minimum requirements (Computer requirements tab).

To install BUDS2, execute the installation program called "BUDS2_Setup.exe". 

If you are not logged-in as Windows administrator, please run the installation program as Windows administrator. To do this, right-click on the installer and click on "Run as Administrator". If Windows opens a security warning, accept it by clicking on "Run". If you want to cancel the installation process, press the "Cancel" button or the "X" on the top right  of the window at any point of the installation.


Figure 1: Running as Administrator

When the installer opens, select the installation language from the drop-down menu.


Figure 2: Language selection for installation process

Next, the install location and disk space requirements are shown. The install location cannot be changed. If the required disk space exceeds the available disk space, prepare additional disk space and re-start the installation program.


Figure 3: Information of the installation folder

Then, you can choose the folder of the Windows start menu to which you want to add a startup shortcut. By default, it is set to "BRP/BUDS2". If you do not want to create a shortcut in the start menu, select the checkbox "Do not create shortcuts". Acknowledge the configuration by selecting "Install".

In case the error message "BUDS2 already running, you have to shut down all program instances" is shown, you need to stop the currently running BUDS2 application and restart the installation program.

It is not possible to install two versions of BUDS2. Thus, in case of the warning message "BUDS2 already installed …" you need to confirm to uninstall the currently installed version of BUDS2. If you want to keep captured BUDS2 files, backup them first.


Figure 4: Shortcut in Windows start menu

Finally, BUDS2 will be installed on your computer.


Figure 5: Installation of BUDS2

After installation, an information dialog will show the outcome of the installation process. Uncheck "Run BUDS2" and click "Finish" to close this wizard.


Figure 6: Installation completed

Next, follow the instructions for registering a license.

The hardware and software of your computer are critical to ensure an optimal BUDS2 performance. 

BUDS2 is heavy software. Your computer must meet the minimum requirements:

  • Processor type:

-Intel: 3rd generation or later Core i5 or Core i7 processor, or

-AMD: FX or Ryzen processor

  • Processor frequency:

-2 GHz or higher for dual-core processors, or

-1.5 GHz or higher for processors with four cores or more

  • RAM:

-8GB or more

  • Storage:

-at least 5 GB available on the C drive:

-a solid-state disk (SSD) is recommended

  • Screen:

-resolution of at least 1366 by 768

  • USB:

-two USB ports available

  • Operating system:

-Microsoft Windows 7 with service pack 1, 64-bit, or

-Microsoft Windows 10, 64-bit

BRP recommends using the PC for BUDS2 and other BRP usages only. 

Diagnostic tools from other powersport vendors, some computer security suites and some remote administration software have occasionally interfered with the correct operation of BUDS2.

Computer administrator privileges are required for BUDS2 installation.

If you use the Windows 7, then download and install the Microsoft .NET Framework 4: https://www.microsoft.com/en-US/download/details.aspx?id=17851


BUDS2 is need a Microsoft Visual C++ Redistributable versions installed on the computer.

BUDS2 uses Microsoft Visual C++ x86 version.

Check installed versions: Start > Control Panel > Programs > Programs & Features.

Install x86 versions (if missing).

For 32bits & 64bits Operating systems download and install:

1. Microsoft Visual C++ 2010 (x86) Redistributable

https://www.microsoft.com/en-ca/download/details.aspx?id=5555

2. Microsoft Visual C++ 2012 (x86) Redistributable

https://www.microsoft.com/en-ca/download/details.aspx?id=30679 

3. Microsoft Visual C++ 2013 (x86) Redistributable

https://www.microsoft.com/en-ca/download/details.aspx?id=40784 

4. Microsoft Visual C++ 2015 (x86) Redistributable Update 3 RC:

https://www.microsoft.com/en-US/download/details.aspx?id=52685 

Install/update the Java: https://www.java.com/en/ 

Service manual Price
ATV 2017 Outlander 6x6 Series 650 and 1000 Service Manual  $15.00
ATV 2017 Outlander MAX Series 570(PRO)/650/850/1000R Service Manual (Except XMR)  $15.00
ATV 2017 Outlander Series 450 and 570 Engines Service Manual  $15.00
ATV 2017 Outlander X mr Series Service Manual  $15.00
ATV 2017 Renegade Series Service Manual  $15.00
ATV 2017-2021 DS 70, 90, 90 X Service Manual  $15.00
   
ATV 2018 Outlander 6x6 Series 650 and 1000 Service Manual  $15.00
ATV 2018 Outlander MAX Series 570(PRO)/650/850/1000R/T3 Service Manual (Except XMR)  $15.00
ATV 2018 Outlander Series 450 and 570 Engines Service Manual  $15.00
ATV 2018 Outlander X mr Series Service Manual  $15.00
ATV 2018 Renegade Series Service Manual  $15.00
   
ATV 2019 Outlander MAX Series 570(T-Category-PRO+)/650/850/1000R Service Manual (Except XMR)  $15.00
ATV 2019 Outlander Series 450 and 570 Engines Service Manual  $15.00
ATV 2019 Renegade Series Service Manual  $15.00
   
ATV 2020 Outlander MAX Series 570(T-Category-PRO+)/650/850/1000R Service Manual (Except XMR)  $20.00
ATV 2020 Renegade Series Service Manual  $20.00
ATV 2020-2021 Outlander 6x6 Series 650 and 1000 Service Manual  $20.00
ATV 2020-2021 Outlander Series 450 and 570 Engines Service Manual  $20.00
   
ATV 2021 Outlander MAX Series 570(T-Category-PRO+)/650/850/1000R Service Manual (Except XMR)  $20.00
ATV 2021 Renegade Series Service Manual  $20.00
   
Service manual Price
SeaDoo 2017 GTI, GTR, GTS series and WAKE 155 Service Manual  $15.00
SeaDoo 2017 GTX and RXT series, WAKE PRO Service Manual  $15.00
SeaDoo 2017 RXP series Service Manual  $15.00
SeaDoo 2017 SPARK series Service Manual  $15.00
   
SeaDoo 2018 GTI, GTR, GTS series and WAKE 155 Service Manual  $15.00
SeaDoo 2018 GTX and RXT series, WAKE PRO Service Manual  $15.00
SeaDoo 2018 RXP series Service Manual  $15.00
SeaDoo 2018 SPARK series Service Manual  $15.00
   
SeaDoo 2019 GTI, GTR and WAKE 155 Service Manual  $15.00
SeaDoo 2019 GTX and RXT series, FISH PRO and WAKE PRO Service Manual  $15.00
SeaDoo 2019 RXP series Service Manual  $15.00
SeaDoo 2019-2020 SPARK series Service Manual  $15.00
   
SeaDoo 2020 GTI, GTR and WAKE 170 Service Manual  $20.00
SeaDoo 2020 GTX and RXT series, FISH PRO and WAKE PRO Service Manual  $20.00
SeaDoo 2020 RXP series Service Manual  $20.00
   
SeaDoo 2021 GTI, GTR and WAKE 170 Service Manual  $20.00
SeaDoo 2021 GTX, RXT series, FISH PRO, WAKE PRO Service Manual  $20.00
SeaDoo 2021 RXP series Service Manual  $20.00
   
Service manual Price
Spyder 2017 F3 Series Service Manual  $15.00
Spyder 2017 RT Series Service Manual  $15.00
   
Spyder 2018 F3 Series Service Manual  $15.00
Spyder 2018 RT Series Service Manual  $15.00
   
Spyder 2019 F3 Series Service Manual  $15.00
Spyder 2019 RT Series Service Manual  $15.00
Ryker Series 2019 Service Manual  $15.00
   
Spyder 2020-2021 F3 Series Service Manual  $20.00
Spyder 2020-2021 RT Series Service Manual  $20.00
Ryker Series 2020 Service Manual  $20.00
Service manual Price
SSV 2017 Commander Series Service Manual  $15.00
SSV 2017 Defender Series Service Manual  $15.00
SSV 2017 Maverick Series Service Manual  $15.00
SSV 2017 Maverick X3 Series Service Manual  $15.00
SSV 2017 Traxter Series (EU only) Service Manual  $15.00
SSV 2017 Traxter T Series (EU only) Service Manual  $15.00
   
SSV 2018 Commander Series Service Manual  $15.00
SSV 2018 Defender Series (excluding EU) Service Manual  $15.00
SSV 2018 Maverick Series Service Manual  $15.00
SSV 2018 Maverick Trail Series Service Manual  $15.00
SSV 2018 Maverick X3 Series Service Manual  $15.00
SSV 2018 Traxter Series (EU only) Service Manual  $15.00
   
SSV 2019 Commander Series Service Manual  $15.00
SSV 2019 Defender (excluding EU) and Traxter Series Service Manual  $15.00
SSV 2019 Maverick Series Service Manual  $15.00
SSV 2019 Maverick Trail - Maverick Sport Series Service Manual  $15.00
   
SSV 2020 Commander Series Service Manual  $20.00
SSV 2020 Defender (excluding EU) and Traxter Series Service Manual  $20.00
SSV 2020 Defender 6x6 Series Service Manual  $20.00
SSV 2020 Defender PRO Series Service Manual  $20.00
SSV 2020 Maverick Series Service Manual  $20.00
SSV 2020-2021 Maverick Trail - Maverick Sport Series Service Manual  $20.00
   
SSV 2021 Defender (excluding EU) and Traxter Series Service Manual  $20.00
SSV 2021 Maverick Series Service Manual  $20.00

"Mechatronic Expert" - is a advanced license of the BUDS2 software developers which gives a privileges of "Super User". This license is not available for BRP dealers and distributors. 

License "Mechatronic Expert" is designed for advanced configuration of the vehicle's electronic modules, as well for recovering after update faults. 

This license covers all BRP vehicles: 

  • SeaDoo MY2017+ 
  • Skidoo and Lynx MY2017+ 
  • Can-Am MY2017+ 

You can choose the validity for 7 days, 30 days, 60 days, 90 days, 180 days, 1, 2, 5 and 10 years. 

In addition to the basic capabilities of the license "Dealer Technician", the license "Mechatronic Expert" allows you to do the following procedures: 

  • Change the VIN and Model numbers (is useful after ECU replacing/reprogramming); 
  • View stories in hours, rather than percentage; 
  • Enable/disable DESS (start vehicle with any key (except Roadster Spyder/Ryker); 
  • Change the DESS key type in two clicks (normal, learning, rental); 
  • Change the Total Vehicle Hours (SeaDoo ECU Bosch); 
  • View more information blocks; 
  • Edit injector's coefficient for E-TEC Skidoo; 
  • Enable/disable vehicle’s options/modules/sensors; 
  • Increase the power of Spark 60 hp up to 90 hp. 

The differences between licenses "Dealer Technician" and "Mechatronic Expert" can be seen in the comparison table. 

BUDS2 software is updated periodically. New versions includes support for new models, updates for electronic modules and updates of the diagnostic software. 

All needed software (current and subsequent versions of BUDS2) can be downloaded from our FTP server, access to which is available for our customers during the validity period of the purchased license. 

If you would like to make tests of any license, please fill out this Request. In reply we'll send the BUDS2 software and 3-days license with instructions.

 

All product names, trademarks and registered trademarks listed on this website are property of their respective owners.
All company, product and service names used in this website are for identification purposes only.
Using of these names, trademarks and brands on this website does not imply their endorsement.
Diag-systems.com is a e-commerce website for sale diagnostic systems for various vehicles. We are not the official representatives of any vehicle manufacturers. 
Related Products